伸縮棚伸縮臂的原理主要基于液壓系統驅動和結構設計實現伸縮功能，具體可分為以下四點：

　　The principle of the telescopic arm of the telescopic shed is mainly based on the hydraulic system drive and structural design to achieve the telescopic function, which can be divided into the following four points:

　　液壓系統驅動

　　Hydraulic system drive

　　通過液壓泵向液壓缸輸送高壓液體，驅動伸縮臂的伸縮運動。液壓系統具有穩定可靠、承載力強、控制精準的特點，能滿足不同工況需求。

　　High pressure liquid is delivered to the hydraulic cylinder through a hydraulic pump to drive the telescopic movement of the telescopic arm. The hydraulic system has the characteristics of stability, reliability, strong load-bearing capacity, and precise control, which can meet the needs of different working conditions.

　　伸縮結構設計

　　Expansion structure design

　　采用多節式結構（如五節主臂），每節通過鉸鏈或銷孔連接，實現逐節伸縮。

　　Adopting a multi section structure (such as a five section main arm), each section is connected by hinges or pin holes to achieve section by section expansion and contraction.

　　縮回時通過內置彈簧和互鎖機構鎖定各節連接，確保穩定性；伸長時液壓缸推動活塞桿帶動臂體伸展。

　　When retracted, the connections of each section are locked by built-in springs and interlocking mechanisms to ensure stability; When extending, the hydraulic cylinder pushes the piston rod to extend the arm body.

　　傳感器與控制系統

　　Sensors and Control Systems

　　配備傳感器實時監測伸縮臂長度、承載力等參數，并通過控制系統調節液壓系統壓力和流量，實現精準控制。

　　Equipped with sensors to monitor real-time parameters such as the length and load-bearing capacity of the telescopic arm, and adjust the hydraulic system pressure and flow rate through the control system to achieve precise control.

　　應用場景適配

　　Application scenario adaptation

　　適用于貨物裝卸、建筑施工等領域，通過調整液壓系統壓力和伸縮結構組合，滿足不同臂長需求。

　　Suitable for fields such as cargo loading and unloading, construction, etc., it can meet different arm length requirements by adjusting hydraulic system pressure and combining telescopic structures.

　　伸縮棚電動伸縮臂電機功率多大？

　　What is the power of the electric telescopic arm motor for the telescopic shed?

　　伸縮棚電動伸縮臂電機的功率范圍根據型號和定制需求有所不同，具體參數如下：

　　The power range of the electric telescopic arm motor for the telescopic shed varies depending on the model and customization requirements. The specific parameters are as follows:

　　功率范圍

　　power range

　　電動伸縮雨棚電機功率通常在 0.01-40W 之間，具體數值需根據推桿直徑、行程長度等參數定制。

　　The power of the electric retractable canopy motor is usually between 0.01-40W, and the specific value needs to be customized according to parameters such as push rod diameter and stroke length.

　　其他關鍵參數

　　Other key parameters

　　電壓 ：常見為 3V-24VDC ，部分高端型號支持更高電壓。

　　Voltage: Commonly ranging from 3V-24VDC, some high-end models support higher voltages.

　　轉速 ：輸出轉速范圍為 5-2000rpm ，減速比可達 5-1500 。

　　Speed: The output speed range is 5-2000rpm, and the reduction ratio can reach 5-1500.

　　應用場景 ：適用于直徑 3.4mm-38mm 的伸縮推桿，行程和推力等參數也可按需定制。

　　Application scenario: Suitable for telescopic push rods with diameters ranging from 3.4mm to 38mm, and parameters such as stroke and thrust can also be customized as needed.

　　建議根據實際使用需求（如推重、行程長度）聯系廠家進行詳細參數匹配與定制。

　　It is recommended to contact the manufacturer for detailed parameter matching and customization based on actual usage needs, such as thrust and travel length.

　　本文由 濟南伸縮蓬   友情奉獻.更多有關的知識請點擊  http://www.hongroom.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan retractable tent For more related knowledge, please click http://www.hongroom.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.